Iscar is introducing Penta 34 carbide inserts using a new PB chipformer. The PB chipformer features a single cavity using a positive rake, neutral shoulder angle, and a honed edge. It is actually a C-type chipformer using a dissimilar frontal edge.

The new chipformer was engineered for machining soft materials. It is an remarkable solution for parting bearing steel and other tremendously ductile materials. It can be used at low feed: 0.03 to 0.10 mm/rev.

The combination of the brand new chipformer and IC908 grade provides excellent chip breaking and tool life results. The Penta 34-PB is available in a 1.5 to 3.0 mm width range, made from the versatile IC908 PVD coated grade. The brand new family extends the application range of Iscar's most economical grooving and parting PENTA 34 carbide inserts. The Penta 34-PB, when sized up to a competitor's tool, is a winning solution for machining every soft and ductile material.

Iscar's Upgrades for Parting

Iscar has developed a new family of reinforced Tang-Grip blades for the popular TRAUB (TNL and TNK models) and INDEX (MS18C model) turn/mill machines. These blades, due to their reinforced architecture, can be used in long overhang. Only the part of the blade essential for penetration (cutting depth) has a reduced width. The rest is thick, which provides enhanced rigidity and stiffness. These blades are an excellent solution for parting and grooving between the main and sub-spindle of turn/mill machines. The single-ended insert has a incredibly rigid clamping and therefore provides a very substantial advantage over any other system.

Further additions to Iscar's Grip family are Do-Grip carbide inserts built from the brand new Sumo Tec carbide grades: IC807 IC808 and IC830. The brand new Sumo Tec grades significantly prolong insert life, due to the most advanced coating technology followed by a specialized surface treatment. This also provides enhanced tool life due to low surface stress and an evenly coated top surface. The even surface contributes to smooth uninterrupted chip flow, less introduced heat and less friction. The new process improves toughness and chipping resistance and thus curtails friction and built-up edge. This in turn increases and prolongs tool life at increased machining conditions for all types of work piece materials. The new PVD process is constructed of Iscar's AL-TEC coating technology, utilizing the unique surface treatment.

Iscar's Chip Splitting Inserts
Iscar's new HM90 APCR 220605-CS grooved carbide inserts put an end to chip jamming complications in rough milling of aluminum, where chips can pile up. They are a part of Iscar's growing Helialu HM90 line of inserts made specifically for aluminum milling. With two grooves pressed into each polished cutting face, the inserts split aluminum chips into a manageable size for easy, reliable evacuation despite the application's characteristic high chip volume. The 22 mm inserts, each with two edges, are designed to maximize metal removal over the comprehensive range of aluminum roughing conditions, from high power/low speed to high power/high speed. They work specifically well with Iscar's new HM90 EAL/FAL...22 aluminum rough milling cutters. Besides reliably clearing chips, the inserts conserve power and reduce chatter in long-overhang setups. The inserts feature a cavity on the bottom to be certain correct mounting in cutter chip pockets equipped with standard spring pins. For optimum chip control, Iscar advises using the HM90 APCR chip-splitting insert only in cutters with an even number of flutes.

The Newest In Carbide Endmill Architectures In A Lengthy And Outstanding Line From Iscar
Manufacturers and die & mold shops can eliminate chatter problems in many milling operations with Iscar's new Chatterfree endmills. The cutters' variable-pitch flute pattern eliminates harmonic vibration, the main source of chatter. This enables faster cutting and finer finish in rough or finish slotting, shoulder milling and cavity milling.

Iscar Offers A Completely New Family Of Slitting Cutters Applying Tang-Grip Technology And The Sturdiness Of Sumo Tec Grades
Iscar now offers a family of high-performance slitting tools that combine the convenience and security of Tang-Grip clamping with the added durability of the new Sumo Tec insert grades. The concept, already proven successful in Tang-Grip parting tools, has now been extended to slitting cutters.

Iscar Recently Releases Numerous Original Lines To Enlarge Their Family Of Milling Cutters
Iscar recently released a new family of High Speed Milling adjustable endmills and facemills that will improve milling of aluminum, non-metallics, cast iron and hardened steel. This should prove especially useful in the automotive and aerospace industries.

Push Pull Testing For Building Industry With Calibrated Measuring Instruments. Mechanical Load Testing Methods For On Site Evidence To Testing Standards.
Push Pull Testing for the Railway industry for proof of reliable anchor fixings. Calibrated push pull force gauges are used for stress load testing along with tensile strength pull testing procedures. Proof of load testing undertaken, measured, recorded in a reliable and standard way to BS5080 Part 1 standards.

Several Progressions Have Extended Iscar's Families Of Indexable Endmills For Heightened Productivity
Helido-Upfeed 04 Two years ago Iscar introduced the extremely efficient H600 indexable endmill line, based on conceptually new Helido-Upfeed double sided inserts with 6 cutting edges. The first insert launched was the H600 WXCU 0806..., which was designed for milling cutters in the diameter range of 50 to 125 mm.

A Number Of Upgrades In Carbide Inserts From Iscar Across The Past Decade
Iscar is announcing a brand new unique milling system that includes tangential, clamped, butterfly-shaped LNKX carbide inserts. The butterfly-shaped insert has meaningful advantages compared to the current flat, square shapes. The new geometry has more cutting edges, positive rake face, decreased cutting forces resulting in better performance.

Consider Automotive Manufacturing Jobs.
There is no point in denying that workers serving in the automotive industry are also suffering from the economic recession that everybody is experiencing world wide.

Graduate Careers- Get A Job Within LandRover
It is pretty clear that people who work within the car industry will be having the same monetary problems as everyone else in the world due to the economic downfall.